Woodcraft Technologies

Woodcraft makes sport bike products that make sense!
Website

About

Woodcraft Technologies makes sport bike products that make sense! We are designers, manufactures and distributors. Producing some of the worlds finest and most innovative products for motorcycle road racing and track day usage. We produce engine case protection covers, frame and axle slider protection, clip-on handle bars sets and risers, rear set control kits, race stands and tire warmers. We also are US distributors for Skutrnet products which include: GoPro & Garmin camera mounts, key switch elimination harnesses and exhaust servo elimination black boxes. We are also the US importer and distributor of the Armour Bodies race bodywork which was consider the best available in a RoadRacing World test.

11 Reviews Write a Review

M3NTAL rider photo
(4.3/5 Rating)
M3NTAL - 9 months ago

From Bike Mod: Woodcraft riser Clip-ons

With the 2 inch risers, these were still livable on the street while giving a clear advantage over the stock bar on the track.
joeymink rider photo
(4.3/5 Rating)
joeymink - 9 months ago

From Bike Mod: Woodcraft Technologies rear sets

Woodcraft's rear sets are freakin' bulletproof. Extremely simple, extremely effective. Wonderful at the track (where they belong), but hours on the street have me wanting to put the stockers back on. Minimally adjustable, but I appreciate less flexibility in exchange for something that will not break when the bike goes sliding.

I'm cheap, and therefore grateful they offer "basic" sets like this one that allow reuse of the stock pedals.

22 Customer Bikes Add Your Bike

Promo Codes

Log in or register to see if this vendor has a promo code!

1 Photos

Garage

Reviews Write a Review

M3NTAL rider photo
(4.3/5 Rating)
M3NTAL - 9 months ago

From Bike Mod: Woodcraft riser Clip-ons

With the 2 inch risers, these were still livable on the street while giving a clear advantage over the stock bar on the track.

joeymink rider photo
(4.3/5 Rating)
joeymink - 9 months ago

From Bike Mod: Woodcraft Technologies rear sets

Woodcraft's rear sets are freakin' bulletproof. Extremely simple, extremely effective. Wonderful at the track (where they belong), but hours on the street have me wanting to put the stockers back on. Minimally adjustable, but I appreciate less flexibility in exchange for something that will not break when the bike goes sliding.

I'm cheap, and therefore grateful they offer "basic" sets like this one that allow reuse of the stock pedals.


FirstNameDivino rider photo
(5/5 Rating)
FirstNameDivino - 9 months ago

From Bike Mod: Woodcraft Lever Guard

Install was a breeze. Two allen keys and 5 Min. Hopefully i never use it, but it looks great!

joeymink rider photo
(4.3/5 Rating)
joeymink - 9 months ago

From Bike Mod: Woodcraft Technologies rear sets

Learned in May that the stock bits break when you crash. I doubt these will fail as easily! Solid as hell with a lot of peg adjustability (if you're willing to remove the whole rearset to adjust them). The allen bolts that mount them to the frame were super-soft though - nearly stripped one of them.


Woodcraft rider photo
(5/5 Rating)
Woodcraft - 9 months ago

From Bike Mod: Woodcraft Technologies rear sets

Yamaha R3 2015 Adjustable, GP Shift Rearset Assembly Complete W/Shift & Brake Pedal, Black

Woodcraft tested these kits to get them in the perfect place for both the street or the track. The range of adjustment 1" to 2" above and 3/4" to 1 1/2" back from the OEM position. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position with a shift rod change (2 SKUs to choose from).

Woodcraft rider photo
(5/5 Rating)
Woodcraft - 9 months ago

From Bike Mod: Woodcraft Technologies case covers

Woodcraft 2-piece engine covers will give your bike a custom look that will make you stand out in the crowd. All of our covers are 100% CNC machined from 6061 Aluminum billet to give you both great looks and exceptional strength. The patented replaceable stainless steel (or Aluminum) skid plate adds wear resistance in the most vulnerable area and can keep your cover both functional and looking good through multiple crashes. The plate is internally bolted so that you don’t have to worry about trying to remove bolts with the heads ground off.


Joonil rider photo
(5/5 Rating)
Joonil - a year ago
Used to have a Triumph Daytona track bike with a pair of Woodcraft clip-ons. Remember them being one of the few 2-pc fork clamp options for that bike on the market back then. At the time not having to remove the top triple was a big selling point. Replacement parts after the inevitable track crash were accessible (vendors on track usually had them) and customer service was on point.

joeymink rider photo
(5/5 Rating)
joeymink - a year ago
Bulletproof products that favor simplicity and reliability over complexity and adjustability. And if you're out and about, you're bound to find replacement parts nearby. For racing hardware, it's hard to go wrong with these guys!

Customer BikesAdd Your Bike

Photos